Introduction to dimming smart glass

The original glass of different manufacturers shows that the quality of the glass is not good, and some of the original pieces have more internal impurities.

Dimming Smart Glass is a new type of special optoelectronic glass product which combines liquid crystal film into two layers of glass and is laminated by high temperature and high pressure. The user controls the transparent and opaque state of the glass by controlling the on and off of the current. The glass itself not only has the characteristics of all safety glass, but also has the privacy protection function to control the transparency of the glass. Due to the characteristics of the liquid crystal film interlayer, the dimming glass can also be used as a projection screen instead of the ordinary screen to present a high-definition picture on the glass. image.

The sound insulation effect of frosted Smart Curtain Wall Glass can also reduce the stress of patients and improve their treatment effect. Therefore, when customers purchase electronic control glass, they may wish to pay attention to the material of the original film, and the most likely to buy a satisfactory and mature product. Avoid spraying the cleaner directly on the surface of the dimming glass, so as not to cause the Privacy Tint Glass surface to turn yellow due to residual cleaner.

The following are some production and use requirements of atomized Smart Tint Glass:
1. The resistance between the frosted glass grounding contact and the parts that need to be grounded shall not exceed 0.1Ω;
2. The ground leakage current of the atomized glass should not exceed 0.25mA;
3. The atomized privacy tint glass should be able to withstand 120V AC, and it will not break down for 60S;
4. The service life of atomized glass is not less than 50000h;
5. The atomized glass should work normally in the environment of -10℃~+60℃.