PDLC Smart Tinted Glass For Door Decor

Before carrying out the interior dimensions inspection, it is necessary to understand the basic structure of the entire house, including the thickness, location and material of the walls, the type and height of the floor, the height and slope of the roof and other factors. At the same time, it is necessary to detect and record the inclination of the wall, and check the size and position of doors and windows. This information is a key factor in determining the size of the Custom Switchable Film.

Step 2: Measure the wall surface
After determining the basic structure and construction of the house, it is time to start taking measurements of the walls and layout. First of all, it is necessary to use a measuring ruler or laser range finder to measure the length, width, height and slope of each room to confirm the shape and size of the room.
When measuring the wall size, it is necessary to measure the length, width and height of the walls of each room and calculate the area of the entire wall. If there are protrusions, recesses or protrusions on the wall, its length and height must be measured at precise locations to ensure that the size of the PDLC Smart Glass Film can completely cover the entire wall.
Step 3: Measure the size of doors and windows
After measuring the wall size, it is necessary to measure the size and position of the doors and windows. It should be noted that the size and location of doors and windows are important factors affecting the size of Smart Glass film. Because you need to take into account the distance and height of the door and window relative to the wall position, and whether the window is open or not.
When measuring the size of doors and windows, it is necessary to use a measuring ruler or laser range finder to accurately measure the height, width, and depth of the window or door, and record the correct data. It is necessary to focus on factors such as the height of the ground where the doors and windows are located, the distance between the doors and windows and the corners of the house, in order to determine the correct position and size of the Partition Door PDLC Film.

Step 4: Calculate the size required for Smart Tint Glass film
After measuring the interior dimensions and basic structure of the house, it is necessary to calculate the dimensions required for Magic Glass Film. First of all, it is necessary to sort out the measurement data of walls, doors and windows and calculate the size and area of each wall, so as to calculate and confirm the required Dimming Film Roll size. When calculating the size of dimming film, it is necessary to take into account the impact of protection, shock absorption, sound insulation and other functions, as well as the needs of customers.
When determining the size of the Electronic Glass Door Film, the thickness and quality of the smart film also need to be considered in order to confirm whether it can be installed on the actual wall. It should be noted that the installation of smart film requires professional technical and tool support.