How to prevent PDLC Smart Glass Film from being broken?

The Custom Switchable Film needs to be carefully operated in the process of packaging, handling, construction, etc. If the operation is not done properly, it is easy to cause damage to the Smart Film, resulting in cost loss and delaying construction. Today, talk about the following five key points to avoid damage to the Magic Glass Film as much as possible.

1. When the Decorative Window Film is in a curled state, the diameter of the winding core should be controlled within the range of 15-20cm. If the winding core is too small, it will be pressed to the film, and if it is too large, it will easily cause the middle to slip.

2. Hands should be light during the operation of retracting and unwinding the Switchable Smart Tint Film, hold the film and retract it slowly, do not press.

3. When transporting and moving the Privacy Switchable Glass Film, not only the angle and distance of transporting should be paid attention to, but also the surrounding environment should be paid attention to, so as to prevent the film from being bumped and broken due to uneven force.

4. Try not to put other irrelevant tools on the operating table of the Color Switchable Film, keep the table clean, otherwise it is easy to scratch the edge of the dimming film.